It helps extremely worn painted surfaces to have a homogeneous and flawless appearance. It is a new generation water-based machine paste for the removal of deep scratches, the matte appearance caused by UV rays on the paint surface and the effective removal of sanding marks up to 1500 grit. With its extremely homogeneous abrasive grains, Heavy Cut M 210; It has the opportunity to work for a long time with low dust formation and without sticking to application pads and panel gaps with its excellent gloss level and high cutting power. Primarily, it is suitable for hard painted, varnished and all paint types. Cutting: 8.5 Gloss: 6.5 USE RECOMMENDATIONS: A small amount of Heavy Cut M 210 should be ped onto a suitable polishing machine and lamb wool pad or recommended sponge pad or the surface to be applied and spread at low speed, then the speed should be increased, medium pressure should be applied with slow movements on the scratched or worn area. For the best result, it is recommended to apply with M 330 Fine cut and M 440 Ultra Finishing after M 210. Shake before use. Check suitability and compatibility before use. Do not use on hot surfaces. A safety data sheet is available upon request for commercial users. Protect against freezing and excessive heat. Keep out of reach of children. WARNINGS: •Shake before use. •Check suitability and compatibility before use.•Do not use on hot surfaces. •Protect against freezing and excessive heat. •Keep out of reach of children
tr 
en 
de